How to Perform Your SiriusXM TTR1 Software Update

SiriusXM recently enhanced its internet service and the software for the SiriusXM Tabletop Internet Radio TTR1 will need to be updated. Please note that you may need to perform a factory reset on your radio, and everything saved on the radio will be erased.

The complete TTR1 manual is here.

First, you may need to prompt a software update:

1. Press “MENU”

2. Turn the Tune Knob to scroll to and highlight “System Setup”. Press the Tune Knob.

3. Turn the Tune Knob to scroll to and highlight “Software Update”. Press the Tune Knob.

4. Turn the Tune Knob to scroll to and highlight “Check Now”. Press the Tune Knob.

5. The radio will check for a software update. If an update is available, the radio will download and install the update If no update is available, “Software up to date” will be displayed. If a software update is available, “Software update” is displayed.

Once you have the Software update screen displayed:

1. Turn the Tune Knob to highlight “YES” and press the Tune Knob.

2. The radio will download the software update. Allow the download to finish.

3. When the download is complete, you will be prompted to proceed with the installation of the software. The default answer is “YES”. Press the Tune Knob to proceed.

4. You will be warned not to power off the radio, and the radio will be updated with the new software.

5. When the update is complete, you’ll be prompted to press “OK/Tune to start”. Press the Tune Knob.

6. The radio will start with the new software.

You can also program the unit to periodically check for updates in the same menu.

It might also be worthwhile to run a factory reset on the unit. This will erase any settings, such as WiFi passwords, you may have programmed:

1. Press “MENU”.

2. Turn the Tune Knob to scroll to and highlight “System Setup”. Press the Tune Knob.

3. Turn the Tune Knob to scroll to and highlight “Factory Reset”. Press the Tune Knob.

4. Turn the Tune Knob to highlight “YES”. Press the Tune Knob.

5. The screen will display “Restarting” and the radio will turn off.

6. Press “MENU” to exit.

Share Button