Easy to install vehicle specific mount from Panavise will give your SIRIUS install a clean and sharp look. All vehicle specific mounts come with instructions, but most require at least some disassembly of the dashboard of your vehicle and about 30-60 minutes time if you are reasonably technical. Installation does not require any special skills, but if you are not comfortable disassembling your dashboard you should consider having a local installer professionally install it for you.
We highly recommend using the Panavise Tipper in addition to the mount for clearance and tilting.
MOUNTING LOCATION: Upper left corner of glove compartment
TOOLS REQUIRED: T30 & T25 Torx wrench, Flat screwdriver
HARDWARE INCLUDED: None
MODELS & YEARS: T600 93-2001, T800 93-2001, W900 93-2001 ( With Easy Reach Panel)
This is for trucks WITH EASY REACH DASH.
STEP #1 With the T30 Torx wrench remove the switch panel from the easy reach dash panel. Set screws aside. With your hands open the panel and let is rest open.
STEP #2 Place the hole of the InDash Mount over the upper right corner hole of the panel and insert the InDash Mount onto the plastic lip. Make sure the InDash hole is aligned with the panel hole. Close the panel, keep hole aligned and install the screws to secure the panel and InDash Mount.
STEP #3 Attach phone holder to InDash.
| Kenworth | T600 | 1993 to | 2001 |
| Kenworth | W900 | 1993 to | 2001 |
| Kenworth | W900 | 1993 to | 2001 |