Pro Fit International Vehicle Specific Mounts are made specifically to fit each vehicle. They use existing dash fittings so there is no need to alter the interior of your vehicle and they blend in well for a much cleaner and more finished look. The picture above shows where it installs in your car and included below are the installation instructions to give you an idea of how difficult it is to install into your vehicle (also, the pdf manual is available above by clicking on the pdf icon). On some cars the VSM can be easily installed without tools in a few minutes, in some cars it requires more effort.
BR>
We highly recommend using the Pro-Fit Easy Swivel in addition to the mount for clearance and tilting.
TOOLS REQUIRED: Small 90° angle hook tool, 9/32" socket, ratchet, and extension.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: To the left of the ash tray
STEP 1.
Begin by removing the plastic ashtray assembly. This assembly consists of ashtray, coin
holder, etc. Using hook tool, insert behind tabs on arms holding ash tray in place, releasing
tabs. Let ash tray assembly hang to side, leaving wires attached. Remove two (2) 9/32"
bolts holding left side of ashtray assembly bracket in place.
STEP 2.
Install hang-up cup onto Pro.Fit VSMTM. Place Pro.Fit VSMTM into position using these two
factory holes over the top of the bracket for the assembly. Replace factory screws and tight-
en. Slide ash tray back into place.