Easy to install vehicle specific mount from Panavise will give your SIRIUS install a clean and sharp look. All vehicle specific mounts come with instructions, but most require at least some disassembly of the dashboard of your vehicle and about 30-60 minutes time if you are reasonably technical. Installation does not require any special skills, but if you are not comfortable disassembling your dashboard you should consider having a local installer professionally install it for you.
We highly recommend using the Panavise Tipper in addition to the mount for clearance and tilting.
MOUNTING LOCATION: Right side of climate control
TOOLS REQUIRED: Phillips screwdriver
HARDWARE INCLUDED: None
STEP #1: Carefully release the small bezel that surrounds the climate control. Start by pushing down the sides
at the top of the bezel, and pull out to release the clips. Continue working your way to the center of the bezel,
releasing (4) total clips. Push bezel up from the bottom to release (3) more clips. Set bezel aside.
STEP #2: With Phillips screwdriver, remove (2) screws on the right side of the climate control. Place the
InDash by PanaVise over the screw holes and reinstall the (2) screws.
STEP #3: Reinstall the bezel carefully as to not breack any of the (7) clips.