Easy to install vehicle specific mount from Panavise will give your SIRIUS install a clean and sharp look. All vehicle specific mounts come with instructions, but most require at least some disassembly of the dashboard of your vehicle and about 30-60 minutes time if you are reasonably technical. Installation does not require any special skills, but if you are not comfortable disassembling your dashboard you should consider having a local installer professionally install it for you.
We highly recommend using the Panavise Tipper in addition to the mount for clearance and tilting.
Compatible Vehicles T300 02-07 T600 02-05 T800 02-05 W900 02-05
MOUNTING LOCATION:
Right side of dash cavity
TOOLS REQUIRED:
T-20 Torx driver
Large pliers or Channelocks
Step# 01
With T-20 Torx driver or Flat screwdriver remove the (2) screws that hold the dash panel on that is just left of the glove box. Pull the panel back enough to install the InDash by PanaVise Mount.
Step# 02
Place the InDash by PanaVise Mount over the top right hole on the dash cavity. Temporarily Install the screw to hold the mount in place. Align InDash by PanaVise Mount to the side of the dash panel. With Pliers crimp down the (2) tabs to hold the mount in place.
Step# 03
Holding onto the mount, unscrew the screw and put dash panel back in place, and reinstall the (2) screws. Attach phone holder or device to InDash by PanaVise Mount.