Pro Fit International Vehicle Specific Mounts are made specifically to fit each vehicle. They use existing dash fittings so there is no need to alter the interior of your vehicle and they blend in well for a much cleaner and more finished look. The picture above shows where it installs in your car and included below are the installation instructions to give you an idea of how difficult it is to install into your vehicle (also, the pdf manual is available above by clicking on the pdf icon). On some cars the VSM can be easily installed without tools in a few minutes, in some cars it requires more effort.

BR>
We highly recommend using the Pro-Fit Easy Swivel in addition to the mount for clearance and tilting.
TOOLS REQUIRED: Hook tool, 9/32 socket and driver.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: To the right of the radio.
STEP 1.
Begin by inserting hook tool under cover for ignition switch and
pulling back to release two (2) clips Set cover aside. Starting by
ignition switch, insert hook tool behind trim bezel which sur-
rounds the climate control and radio and pull toward you to
release two (2) clips. Continue working bezel loose with hands
until removed. Do not disconnect wiring. Let bezel hang.
STEP 2.
With 9/32 socket and driver locate and remove the factory screw
to right of the radio. Align Pro.Fit VSMTM over screw hole and
centering pin. Insert factory screw and tighten.
STEP 3.
Install trim bezel back into position. Put ignition cover back into
position. Attach hang-up cup onto Pro.Fit VSMTM.