Easy to install vehicle specific mount from Panavise will give your SIRIUS install a clean and sharp look. All vehicle specific mounts come with instructions, but most require at least some disassembly of the dashboard of your vehicle and about 30-60 minutes time if you are reasonably technical. Installation does not require any special skills, but if you are not comfortable disassembling your dashboard you should consider having a local installer professionally install it for you.
We highly recommend using the Panavise Tipper in addition to the mount for clearance and tilting.
MOUNTING LOCATION: Right side of radio
TOOLS REQUIRED: T25 Torx wrench
HARDWARE INCLUDED: None
STEP #1 Remove the panel located above the cup holder (it holds the radio) by removing (4) screws with the T25 Torx wrench. Once the (4)
screws have been removed, pull the entire panel out along with the radio that is integrated into this panel.
STEP #2 Remove (2) screws located behind the panel and to the right side of the radio. These (2) screws hold the bracket that holds the radio in
place.
STEP #3 Place the InDash Mount over the metal bracket holes, align and install the (2) screws. Before tightening the screws push the InDash
Mount against the edge of the panel then tighten the screws. Install the panel with the radio back in place. Install the (4) screws and tighten. Attach the phone holder to InDash Mount.