Your Shopping Cart

Items
0
Cost
$0.00
LOGIN CHECKOUT

Pro-Fit CV-76-95 Custom Mount

PART NUMBERS CV-76-95
PRICE
SALE PRICE
$26.99
$19.99
SHIPPING FREE with $70 order
IN STOCKYes
  • Cv-76-95-1_2-small
  • Cv-76-95-1_2-small
Cv-76-95-1_2-small
Click image to enlarge

Pro Fit International Vehicle Specific Mounts are made specifically to fit each vehicle. They use existing dash fittings so there is no need to alter the interior of your vehicle and they blend in well for a much cleaner and more finished look. The picture above shows where it installs in your car and included below are the installation instructions to give you an idea of how difficult it is to install into your vehicle (also, the pdf manual is available above by clicking on the pdf icon). On some cars the VSM can be easily installed without tools in a few minutes, in some cars it requires more effort.

BR>
We highly recommend using the Pro-Fit Easy Swivel in addition to the mount for clearance and tilting.



TOOLS REQUIRED: 9/32 socket and ratchet, #2 Phillips screwdriver, 5/64 drill bit and drill.
PARTS INCLUDED: Pro.Fit VSMTM, four (4) #10x5/8 screws and instructions.
LOCATION: To the right of climate control.
STEP 1.
Begin by removing trim bezel surrounding the radio and climate control,
and extending across the instrument cluster and dash. To do this, remove
the two (2) screws above the the instrument cluster. To release clips, start
on far right side, working fingers underneath trim panel and pulling.
Panel does not need to be removed completely.
STEP 2.
Remove four (4) bolts holding climate control in place [two (2) on top
and two (2) on bottom]. Let climate control hang down out of the way.
STEP 3.
Install hang-up cup onto Pro.Fit VSMTM. Insert Pro.Fit VSMTM up
into far upper right hand corner of climate control cavity as tightly as
possible. IMPORTANT! Drill two (2) 5/64pilot holes, using holes on
center face of mount as a guide. Insert two (2) provided screws into cen-
ter face of mount and tighten. This must fit tightly. Mark holes for left
side screws at this time only. Drill two (2) 5/64pilot holes and insert
side screws and tighten.
STEP 4.
Reinstall climate control unit and bolts, dash panel, and screws or bolts.

This Product is Compatible with the Following Makes and Models of Car

Chevrolet S-10 1995 to 1997
Chevrolet S-10 1995 to 1997