Pro-Fit MC-51-86 Custom Mount
PART NUMBERS
MC-51-86
PRICE
SALE PRICE$26.99
$19.99
SALE PRICE
$19.99
SHIPPING
FREE with $70 order
IN STOCKYes
Also Recommended
Pro Fit International Vehicle Specific Mounts are made specifically to fit each vehicle. They use existing dash fittings so there is no need to alter the interior of your vehicle and they blend in well for a much cleaner and more finished look. The picture above shows where it installs in your car and included below are the installation instructions to give you an idea of how difficult it is to install into your vehicle (also, the pdf manual is available above by clicking on the pdf icon). On some cars the VSM can be easily installed without tools in a few minutes, in some cars it requires more effort.
We highly recommend using the Pro-Fit Easy Swivel in addition to the mount for clearance and tilting.
TOOLS REQUIRED: #2 Phillips screw driver, std screw driver.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: The right of the climate control.
STEP 1.
Begin by applying emergency brake and placing shifter in drive or 3rd gear. Lift cover on
center console, remove two (2) screws at the base and lift out. Remove screw at front of
tray which holds center wood trim panel. GENTLY lift on rear of wood panel and remove.
Disconnect wiring harness and set aside. Remove ash tray. Remove two (2) screws at rear
of ash tray assembly. Disconnect and remove.
STEP 2.
Placing hand under front edge of radio, depress two (2) plastic clips down to release radio.
Carefully work radio out. DO NOT disconnect the radio! It has an internal security sys-
tem which may be set off. Remove two (2) screws from below, holding the upper trim
bezel. Lift bezel out from bottom. This will pivot up at the top to remove.
STEP 3.
Remove six (6) screws holding plastic climate control panel. Slide out. Attach phone hang-
up cup to Pro.Fit VSMTM. Position mount over lower right screw hole, align for centering
pin to secure mount. Replace panel and upper trim bezel.
STEP 4.
Carefully slide radio back into place. Avoid pinching any wiring. Reconnect wiring on ash
tray assembly and reinstall. Carefully replace center wood trim panel and securing screw.
Replace base to center console and screws.
This Product is Compatible with the Following Makes and Models of Car
| Mitsubishi | 300D/E (124 chassis) | 1986 to | 1995 |
| Mercedes | 400D/E (124 chassis) | 1986 to | 1994 |
| Mercedes | 500D/E (124 chassis) | 1987 to | 1994 |
Latest Blog Posts
- Slide 1
On May 23, 2012 Gary Dell Abate aka "Baba Booey" threw out the first pitch for the New York Mets at the new Citi Field. It ended up being one of the worst first pitches in history. So embarrassing that the pitch will never be forgotten amongst Howard Stern fans and even amongst many mainstream sports fans whom have seen footage of the pitch. The term "Baba Booey" from that point on will now be synonmous with a horrible first pitch.Read More...
- Slide 2
"TSS-Radio is the Alpha and Omega of all things satellite radio. The brainchild of "Tom" Taylor Mitchell, he followed a dream and within 5 years he was the proud owner of the Baba Booey ball(s) and getting hit by paintballs while strapped to a torture rack wearing nothing but a protective cup. Nowhere will you find another person/company as dedicated to all things satellite and their loyal customers."
- Scott S. Beaumont, CARead More...- Slide 3
"If you are looking for a message board for discussions on satellite radio, internet radio, technology and more check out the Digital Radio Central forums on DRC. People can talk about their satellite radio shows, internet radio shows, podcasts, iPhone technology and members are very helpful in solving problems and discussing SiriusXM, Pandora, Radio IO, Slacker, RDio, Spotify and more."
- Taylor MitchellRead More...
© 2012 TSS-Radio, LLC All Rights Reserved