The SIRIUS Connect Home Tuner SCH1 allows the addition of SIRIUS Satellite Radio to any SIRIUS Ready home stereo receiver or book shelf system such as the RCA RS2058 Rip and Go SIRIUS-Ready Home Stereo.
There are 5 connections on the SCH1 Tuner.
We will be using 4 of them in this install. The one we will not be using is the Digital Optical Output. If your stereo has an optical input, you can use this output instead of the RCA output, although you will have to supply the optical cable.
Begin by connecting the 8 pin controller cable to the SIRIUS Home Connect and then to the SIRIUS Ready 8 pin jack on the back of your receiver. This connection allows your SIRIUS Ready Receiver to control the Home Connect.
Now connect the red and white RCA Cables to the Home Connects outputs and to a line input on the back of your stereo receiver. It is not necessary in all cases to connect any of the audio outputs because the sirius signal is delivered through the 8 pin connector.In the case of the of some systems, like the RCA RS2058, you will need this connected to be able to record SIRIUS Content.
Next, connect the Antenna and AC power adapters to the other end of the SIRIUS Connect unit. Once all of these connections are completed, you will be ready to enjoy SIRIUS Satellite Radio!
|
