Sportster Replay offers all the features of the original Sportster plus the Replay features: pause, rewind and replay your favorite SIRIUS content!
NOTE: These receivers were manufactured after the FCC regulations on FM Transmission were changed. They have significantly weaker FM Transmitters than older radios manufactured before that regulation.
They WILL NOT perform with the same strength when tuned in over an FM frequency wirelessly. It is highly recommended that you connect the audio directly to your car stereo via an Auxiliary Cable, Auxiliary Input Adapter, Cassette Tape Adapter, or FM Direct Adapter.
Radio Specs:
Audio Output: 2.2V (Peak-to-Peak)
Total Harmonic Distortion (THD): <0.3%
Signal-to-noise (S/N): Greater than 75dB
Fuse Requirement: 3A Slow Blow
Power Supply: 10-16V, Negative Ground, DC
Receiver Dimensions: 115mm(W) x 78mm(H) x 28mm(D) (4-1/2” W x 3” H x 1-1/8” D)
Receiver Weight: 7oz.
Remote Control Dimensions: 49mm(W) x 104mm(H) x 23mm(D) (1-7/8””W x 4-1/8”H x 7/8”D)
Remote Control Battery Requirements: CR2025
Common sound issues related to the weaker FM transmitter.
If you believe this may be an issue for you, or if you are experiencing sound quality issues with your current setup, we'd strongly recommend exploring the following options to directly connect your Sirius receiver to your car radio.
This will connect the SIRIUS receiver directly to your car's FM antenna giving you better sound with the quality of a strong FM station.
A great solution if you have a cassette player in your car. It will provide the same quality sound as a cassette tape.
Many new vehicles have a jack directly on the front of their radios. Auxiliary input adapters can be installed in many other vehicles. Both options will provide digital quality audio for the best listening experience.
For a more detailed explanation of these options checkout this guide.