MOUNTING LOCATION: Right side of radio
TOOLS REQUIRED: 10mm nut driver, Hook tool
HARDWARE INCLUDED: None
STEP #1 Remove the trim strip located between the air bag and glove compartment by inserting the hook tool under the trim strip on the right side of the passenger side; pull to release. Keep working toward the left side, remove completely and set aside. Remove the trim strip above the radio that extends to the right of the steering column by inserting the hook tool under the left side of the trim next to the steering column and pull. Set trim strip aside. STEP #2 With the 10mm nut driver, remove a 10mm Hex nut located to the right side of the radio. Take the InDash, and place the slotted hole on the stud; install the 10mm Hex nut. Install the trim strip above the radio, then install the trim strip above the glove box. STEP #3 Attach radio to InDash Mount.