Details
MOUNTING LOCATION: Right side of dash TOOLS REQUIRED: T20 Torx wrench Step# 01 Remove the trim panel that surrounds the radio by pulling from the right side of the panel to release two clips that secure the end of the trim panel. Loosen the trim panel just enough to expose the Torx screw which holds the end trim piece in place. (The end trim piece is located to the right and just above the radio.) Using the Torx wrench, remove the Torx screw and set aside. Remove end trim piece by grasping with hands and pulling toward you to release one clip on the top of the end trim piece. Set trim aside Step# 02 Remove two screws that hold the wood grain trim panel. Place InDash Mount over the holes and reinstall the screws to secure InDash. Step# 03 Install the end trim piece back in place. Install the screw behind lower trim panel. Install the lower trim panel that surrounds the radio.
